Table of Contents
Advertisement
Instructions for use
GB
English,1
WMFG 741
FUTURA
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Troubleshooting, 13-14
Assistance, 15-16
WASHING MACHINE
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint Futura WMFG 741
Summary of Contents for Hotpoint Futura WMFG 741
-
Page 1: Table Of Contents
Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal WMFG 741 Opening the porthole door manually Description of the washing machine, 8-9 Control panel Display Running a wash cycle, 10... -
Page 2: Installation
Installation ! Keep this instruction manual in a safe place 2. If the floor is not perfectly level, compensate for future reference. Should the appliance be for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle sold, transferred or moved, make sure the of inclination, measured according to the instruction manual accompanies the washing... -
Page 3: Connecting The Drain Hose
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without bending • the socket is compatible with the washing it, to a draining machine’s plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may ! The power supply cable must only be not correspond with the coloured markings replaced by an authorised serviceman. identifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &... -
Page 5: Technical Data
Technical data Model WMFG 741 width 59.5 cm Dimensions height 85 cm depth 54 cm Capacity from 1 to 7 kg Electrical please refer to the technical connections data plate fixed to the machine maximum pressure 1 MPa (10 bar) -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and To access the pre-chamber: electricity supplies 1. using a screwdriver, remove • Turn off the water tap after every wash cycle. the cover panel on This will limit wear on the hydraulic system the lower front part of inside the washing machine and help to the washing machine... -
Page 7: Precautions And Tips
Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The In the event that it is not possible to open the porthole following information is provided for safety reasons and door due to a powercut, and if you wish to remove the must therefore be read carefully. -
Page 8: Description Of The Washing Machine
Description of the washing machine Control panel TEMPERATURE OPTION CLEANING button ACTION buttons and indicator lights button ON/OFF button DISPLAY START/PAUSE CHILD button and indicator SPIN LOCK WASH light Detergent dispenser drawer button CYCLE button SELECTOR KNOB DELAY TIMER button Detergent dispenser drawer: used to dispense DELAY TIMER button: press to set a delayed start for... -
Page 9: Display
Display The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the DELAY TIMER option has been set, the countdown to the start of the selected wash cycle will appear. Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle. -
Page 10: Running A Wash Cycle
Running a wash cycle increased drum rotation. It is useful when removing the 1. SWITCH THE MACHINE ON. Press the button; most stubborn stains. the START/PAUSE indicator light will flash slowly in a For lightly-soiled garments or a more delicate treatment green colour. -
Page 11: Wash Cycles And Options
Wash cycles and options Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) CLEAN Plus 1 Anti Stain 40° 1400 180’ 180’ 2 Whites 60° 1400 60° 1.13 52.5 180’ Cotton Standard 60°... -
Page 12: Detergents And Laundry
1. best possible care. compartment 1: Detergent for the wash cycle Wool: the wool wash cycle on this Hotpoint machine has (powder or liquid) been tested and approved by The Woolmark Company If liquid detergent is used, it is recommended that the... -
Page 13: Troubleshooting
Troubleshooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •... - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Assistance
OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 16: After Sales Service
Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk...