Indoor Unit Installation - Heat Controller B-VCH12FC-1 Installation Manual

Installation Manual
INSTALLATION INSTRUCTIONS

4. Indoor unit installation

1. Pass the piping through the hole in the
wall.
2. Put the upper claw at the back of the
indoor unit on the upper hook of the
installation plate, move the indoor unit
from side to side to see that it is securely
fastened (see Fig.12).
3. For easier installation separate the bottom
of the indoor unit from the wall by inserting
a spaces, such as a piece of foam between
the unit and the wall. Remove the spaces
after the piping is complete.
4. Push the lower part of the indoor unit up
on the wall, then move the indoor unit
from side to side, up and down to check
that the unit has engaged with the lower
hook of the installation plate.
VMH SerieS
8
12
Heat Controller, Inc.
Fig.12