Table of Contents
Advertisement
stood, or if in doubt as to whether the
tool is properly grounded.
5.
Use only 3-wire extension cords that
have 3-prong grounding plugs and
3-pole receptacles that accept the
tool's plug.
6.
Repair or replace damaged or worn
cord immediately.
7.
This tool is intended for use on a cir-
cuit that has an outlet that looks like
the one illustrated above in 125 v~
3-Prong Plug and Outlet. The tool
has a grounding plug that looks like
the plug illustrated above in 125 v~
3-Prong Plug and Outlet.
8.
The outlet must be properly installed
and grounded in accordance with all
codes and ordinances.
9.
Do not use an adapter to connect this
tool to a different outlet.
SKU 66630
For technical questions, please call 1-800-444-3353.
Double insulated tools: tools
with two Prong Plugs
1.
To reduce the risk of electric shock,
double insulated equipment has a po-
larized plug (one blade is wider than
the other). This plug will fit in a polar-
ized outlet only one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact
a qualified electrician to install the
proper outlet. Do not change the plug
in any way.
2.
Double insulated tools may be used
in either of the 120 volt outlets shown
in the preceding illustration. (See
Outlets for 2-Prong Plug.)
Page 9
Hide quick links:
Advertisement
Table of Contents
