Table of Contents
Advertisement
b.
prevent unintentional starting.
ensure the switch is in the off-
position before connecting to bat-
tery pack, picking up or carrying
the tool.
4.
Flashlight use and care
a.
do not use the Flashlight if the
switch does not turn it on and off.
b.
disconnect the battery pack from
the Flashlight before making any
adjustments, changing acces-
sories, or storing the Flashlight.
Such preventive safety measures
reduce the risk of starting the Flash-
light accidentally.
c.
maintain the Flashlight. check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the Flashlight's operation.
if damaged, have the Flashlight
repaired before use.
5.
Battery tool use and care
a.
recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
b.
Use tools only with specifically
designated battery packs. Use of
any other battery packs may create
a risk of injury and fire.
c.
When battery pack is not in use,
keep it away from other metal ob-
jects, like paper clips, coins, keys,
nails, screws or other small metal
objects, that can make a connec-
tion from one terminal to another.
Shorting the battery terminals to-
gether may cause burns or a fire.
SKU 67032
For technical questions, please call 1-800-444-3353.
d.
under abusive conditions, liquid
may be ejected from the battery;
avoid contact. if contact acciden-
tally occurs, flush with water. If
liquid contacts eyes, additionally
seek medical help. Liquid ejected
from the battery may cause irritation
or burns.
6.
service
a.
have your Flashlight serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
Flashlight is maintained.
Flashlight safety Warnings
1.
Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
2.
Avoid unintentional starting. Prepare
to begin work before turning on the
tool.
3.
Do not leave the tool unattended
when it is attached to a battery pack.
Turn off the tool, and disconnect it
from its battery pack before leaving.
4.
The battery charger gets
hot during use. The
charger's heat can build
up to unsafe levels and
create a fire hazard if it does not
receive adequate ventilation, due to
an electrical fault, or if it is used in a
hot environment.
Do not place the charger on a flam-
mable surface. Do not obstruct any
vents on the charger. especially
avoid placing the charger on car-
pets and rugs; they are not only
Page 3
Advertisement
Table of Contents
