Vizio VP42 User Manual page 31

c. Press the
the TUNER MODE option. There
are three choices for the input,
CABLE or AIR (for antenna), and
if you are not sure of your source
or you want the TV to scan for
both types, AUTO. Press the
or button to select your choice.
d. Once selected, press the
button to highlight Auto Search to
scan the available channels.
e. Press the OK button to start the
search. An information panel will be
displayed showing the progress of the
search for analog (NTSC) and Digital
(ATSC) channels.
If you wish to cancel the search for
channels, press and hold the MENU
or OK button for a few seconds.
Note: DTV digital broadcast is not available in all areas. Refer to
to get information about availability in your area, type of antenna and in which direction to
point your antenna. The channel availability through cable depends upon which channels
your cable operator supplies in Clear QAM; consult your cable operator for more
information.
6. Using a PC
If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at
60Hz for best picture quality (refer to the graphic card's user guide for questions on how to set
this timing mode).
Version 9/11/2006
button to highlight
31
www.VIZIOCE.com
VIZIO VP42 HDTV User Manual
www.antennaweb.org