Advertisement
ACKNOWLEDGMENTS
Euphonic Audio would like to thank:
Hugh McDonald
Todd VanSelus
Lynn Keller
Michael Rhodes
Kasim Sulton
and
Leland Sklar
for their invaluable contributions
to the development of the iAMP®
and this manual.
Copyright © 2007 Euphonic Audio
EUPHONIC AUDIO, INC.
iAMP
®
TOLL-FREE (888) 894-3790
OPERATION MANUAL
18 Newtown Blvd • Robbinsville, NJ • 08691
Fax: (732) 267-8514 • Email: info@eaamps.com
www.eaamps.com
Advertisement
Table of Contents
Related Manuals for Euphonic Audio iAMP
Summary of Contents for Euphonic Audio iAMP
- Page 1 Hugh McDonald Todd VanSelus Lynn Keller Michael Rhodes Kasim Sulton Leland Sklar for their invaluable contributions to the development of the iAMP® and this manual. Copyright © 2007 Euphonic Audio EUPHONIC AUDIO, INC. iAMP ® TOLL-FREE (888) 894-3790 OPERATION MANUAL 18 Newtown Blvd •...
-
Page 2: Important Safety Precautions
Euphonic Audio, Inc. address: • Use of the iAMP® may cause permanent hearing loss. Do not operate for long Billing Address: ____________________________________________________ periods of time at a high volume level or at a volume level that is uncomfortable, particularly in a small, enclosed area. -
Page 3: Warranty Service Information
REQUIRED. DO NOT USE WITHOUT A GROUNDING PLUG. • Every board is pre-tested before it is installed into the amp. • Post assembly, each iAMP® is bench-tested before its burn-in phase. • Each unit is burned-in (turned on and allowed to sit “in idle”). -
Page 4: Limited Warranty
If the serial number has been defaced or removed research and development program, our Euphonic Audio, Inc reserves the right to make such determination of the innovative design philosophy, the use of the above on the basis of factory inspection. -
Page 5: Rear Panel Functions
We took our cue from today’s high-end recording studio equipment, thus creating iAMP® needs no fan, the vents on the side, back and top need to be kept clear. a robust integrated amp with an intuitive layout, providing today’s bassist with If you are putting your iAMP®... - Page 6 “dirtier” overdriven-type sound, it is best to use an effects device through the EFFECTS loops (see EFFECTS SECTION) OUTPUT CLIP LED: The iAMP® has a limiter that will keep the amp from sustained clipping. Lighting the LED is not dangerous. When the OUTPUT CLIP LED lights it is just an indication you are at maximum power.
- Page 7 For a long time it has been mistaken that a solid state amp could not have that big, warm tube sound. The flexibility of the iAMP design allows that and many other D - Tone Shaping sounds. Try this setting to get that fat tube amp sound.
- Page 8 The frequency range that The iAMP is designed so that either the presets or the more detailed tone this preset affects is the area perceived as the “solidity of an instrument,”” or how shaping option of the iAMP can be used individually or together.
Need help?
Do you have a question about the iAMP and is the answer not in the manual?
Questions and answers