Table of Contents
Advertisement
Removing the Vegetable Drawer / Crisper
• Slip out the drawer towards the outside until it stops
(1).
• Slightly lift the front part and pull the rest (2), in order
to completely remove the drawer.
• To relocate the drawer slip out towards the front until
it stops.
CRISPER COVER WITH INTERIOR LATTICE (in
some models)
Removing the Vegetable Drawer Cover
• Remove both drawers (see "Removing the Vegetable
Drawer/Crisper").
• Hold onto the support (1) and pull towards the top and
then towards the outside (2).
Installing the Vegetable Drawer Cover
• Put the cover over the supports (1).
• Slightly lift the cover (2) while introducing it to the
support (3).
• Put the inferior piece of the cover in the superior
support (4).
2
USING YOUR REFRIGERATOR
2
1
2
1
1
3
4
CAUTION:
Be careful when you handle the glass
cover because it could loose.
Removing the Interior Lattice
• Remove the cover (See "Removing the Vegetable
Drawer Cover").
• Hold the glass and spin the drawer cover (1).
• Hold the rack and pull the sides of the drawer cover
out to take them off (2).
Replacing the Interior Lattice
• For each rack insert the central edge 1 (near the glass
cover) and pull the cover sides to insert it.
DOOR RACKS
The door racks are removable for easy cleaning and
adjusting.
• To remove the rack, simply lift the rack up and pull
straight out (1).
• To replace the rack, slide it in above the desired
support button and push down until it stops (2).
1
WARNING:
Somebody can be hurt if door racks
are not firmly assembled.
CAUTION
: DO NOT allow children to play with
baskets. Sharp corners on baskets could cause
injury.
NOTE: DO NOT adjust a rack that is loaded with food.
19
2
Advertisement
Table of Contents
