First Time Setup - Panasonic Viera TC-L37E5X Owner's Manual

First Time Setup

The first time setup screen is displayed only when the TV is turned on for the first time after the power cord
is inserted into a wall outlet and when "Auto power on" (p. 51) is set to "No".
or
POWER
OK
Turn the TV On with the POWER button
(TV) (Remote)
POWER
or
Configure your viewing mode
Select your language
Language / Idioma / Langue
Step 1 of 6 / Paso 1 de 6 / Étape 1 de 6
Select your language
Seleccione su idioma
Sélection de la langue
English Español Français
OK
Select
Selección
Sélection
Select your viewing mode (Be sure to select "Home use")
Set viewing mode Step 2 of 6
Select your viewing environment
Home use Store Demonstration
OK
Select
RETURN
●
Please confirm your selection (Home Use) before pressing OK button.
■
If you select " Store Demonstration" by mistake in
confirmation screen will be displayed.
You are selecting the store demonstration mode.
Yes No
If you select "Yes", the picture mode will regularly reset
to "Vivid" and a Picture Refresh message will be displayed on the
screen.
●
Select "No" and return to previous screen
●
If you select "Yes", screen enters the store demonstration mode.
To display the "Set viewing mode" screen again as shown above and select
"Home use", do one of the following:
• Press and hold down the rear POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug in again.
Note
●
If you use any other step other than
button to quit before completing the settings, the next time you turn the TV on,
"First time setup" will not be automatically displayed.
• The settings up to that point are saved.
• You can start "First time setup". (p. 51)
●
Language, ANT/Cable setup, Input labels, Clock can also be changed from the
Settings Menu. (p. 50)
select
OK
OK
select
OK
OK
select
OK
OK
.
then turn the TV off, or if you used the EXIT
,
13