Table of Contents
Advertisement
NVP2415 / NVP2417 / NVP2419
13. Start Up
Hot-key Command Operation
6. Switch to Next Bank
7. Enable / Disable beeper sound
8. Auto Scan for Powered on PC
9. Reset to factory Default Setting
10. Reset to factory Default Setting
Note: The default Beeper function is ON and beeper control is only for available for
Scan Mode.
Note: Not available for password reset.
Note: When the above dialogue appear, type the PC name and the OSD Menu
will search PC name starting from 1st powered on PC port.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL:
23
info@i-techcompany.com
User Manual
• WEB:
www.iTechLCD.com
Advertisement
Table of Contents
