Summary of Contents for Veloteq Cavalier-GT
- Page 1 Veloteq Owner Manual 2008 Veloteq Corporation 2151 Richmond Avenue Shepherd Square Houston, TX 77098 www.Veloteq.com (713 524-1175 Printed in China...
-
Page 2: Forward
Veloteq electric bicycles are engineered as complete systems. Do not attempt to replace any parts with those not supplied by your Veloteq dealer or distributor. The use of chargers, batter- ies and other non-Veloteq parts can result in serious damage to the electrical system and void all product warranties. -
Page 3: Table Of Contents
FEATURES AND OPERATION ................3 NOTICE AND WARNING: (PAY PARTICULAR ATTENTION TO ANY TEXT HIGHLIGHTED IN RED.) ................... 4 HOW TO CHARGE YOUR VELOTEQ ELECTRIC BICYCLE ......5 ASSEMBLY AND ADJUSTMENT ............... 6 FRONT-WHEEL ASSEMBLY AND ADJUSTMENT: ........6 ... -
Page 4: Features And Operation
Features and operation Veloteq electric bicycles are equipped with a brushless DC, pulse wave modulated, 3 -phase electric motor powered by four VRSL colloided, sealed lead acid mainte- nance-free batteries enclosed in a heavy duty polypropolene case with associated hardware. -
Page 5: Notice And Warning
Veloteq. If the electric bicycle or PSU is stored for a prolonged period it should be fully charged prior to storage. -
Page 6: How To Charge Your Veloteq Electric Bicycle
Do not under any circumstances use a charger other than that supplied by Veloteq or a direct replacement obtained from a Veloteq dealer or distributor. Veloteq, its dealers and distributors will not be held liable for any accidents or damages resulting from the use of unauthorized chargers. -
Page 7: Assembly And Adjustment
Assembly and Adjustment Veloteq electric bicycles should be assembled only by personnel qualified to perform the neces- sary mechanical and electrical set up, and adjustment of the wheel alignment and brakes. Front-wheel Assembly and Adjustment: The front wheel is attached to the inside of the front fork insuring equal separation and depth of seating between the right and left fork extensions in relation to the center column. -
Page 8: Rear Drum Brake Adjustment
To adjust the chain link, turn the rear wheel chain adjustment screw as show in Fig. 4, until the chain is allowed to turn freely. The chain slack should be approximately as shown. Veloteq Owner Manual 2008 P. 7 of 15... -
Page 9: Front Drum Brake Adjustment
This will significantly increase battery life. The instrument panel includes a speedometer, odometer, power indicator, lights-on and turn signal indicator. Light switches, turn signal switches and horn button are conveniently located on the right and left handgrip for easy activation while riding. Veloteq Owner Manual 2008 P. 8 of 15 2/18/2008... -
Page 10: Parking Your Electric Bicycle
Do not, under any circumstances, sit on the vehicle while it is elevated on the main kickstand. This can result in damage that may require re- pair or replacement. All Veloteq electric bicycles have locking steering columns to hold your vehicle in place after parking. -
Page 11: Pedal Installation
Use a chain lube specifically formulated for bicycle or motorcycle chains. See the addendum to this manual for periodic lubrication of the GT gear-reduction, lube injected motor. Veloteq Owner Manual 2008 P. 10 of 15 2/18/2008... -
Page 12: Troubleshooting Guide
2. Electric motor, controller, Return to your dealer. Attempts charger, or battery damage. to repair by unqualified personnel may void product warranties. Veloteq Owner Manual 2008 P. 11 of 15 2/18/2008... -
Page 13: Product Warranty For New Vehicles
documentation. - Page 14 This constitutes the entire warranty as stated in Sections 1-3 above. Warranty stations consist of Veloteq distributors, dealers or other authorized locations. The owner is required to retain all records, proof of purchase and warranty information as stated above.
-
Page 15: Owner's Record Of Service/Repair
The power supply must be periodically recharged. We recommend that this be done at three week intervals to prolong the life of the batteries. DATE LOCATION SERVICE PERFORMED Veloteq Owner Manual 2008 P. 14 of 15 2/18/2008... -
Page 16: Addendum I.- Lubrication Of Gear Reduction Motor
There are oil seals on both sides of the fork. Apply grease to the interface of oil seal and bushing. Avoid sand or dirt and listen for an abnormal sound while filling, which will cause fraying of the oil seals. Veloteq Owner Manual 2008 P. 15 of 15...
Need help?
Do you have a question about the Cavalier-GT and is the answer not in the manual?
Questions and answers