Advertisement
SERVICE PRECAUTIONS -1/2
1. Disassembly Procedure
1. Remove 4 screws of a main part bottom.
2. Remove 2 screws of a inside CD lid (No-1 portion of Photo-1).
3. The speaker net left and right is removed, left and right each 2 screws
are removed. (No-2 portion of Photo-1)
Reference Photo-1
2. Service Position
1. When Checking CD main circuit board.
Remove 6 screws (Photo-2, No-1) , remove the CD Mechanism and you
verify when it is stabilized.
2. When CD Mechanism Assy is taken out.
Remove 6 screws (Photo-2, No-2) and remove 1 screw of a substance
bottom central and the Mechanism is removed.
Reference Photo-2
3. Test Mode
1. CD test mode starting method
While pushing the FUNCTION button of the substance,insert the AC
plug in the power source electrical outlet.
Test mode starts and the DYISPLAY lights up all.
Reference Photo-3
2. CD test mode cancellation method
Push the Power button and turn off a power supply.
Push the FUNCTION button again.
Test mode is canceled by one of methods.
-5-
Photo-1
Photo-2
Photo-3
Advertisement
