HP DX2250 Specifications page 10

QuickSpecs
System Details
Service and Support
Altitude
Shock
Vibration
Note 1
On-site Warranty : One-year (1-1-1) limited warranty delivers one year of on-site, next
Note 2
business-day service for parts and labor and includes free telephone support
Note 2
Global coverage ensures that any product purchased in one country and transferred to
another non-restricted country will remain fully covered under the original warranty and service
offering. One-year onsite and labor are not available in all countries.
NOTE 1: Terms and conditions may vary by country. Certain restrictions and exclusions apply.
Other warranty variations may be offered in your region.
NOTE 2: On-site service may be provided pursuant to a service contract between HP and an
authorized HP third-party provider, and is not available in certain countries. Global service
response times are based on commercially reasonable best effort and may vary by country.
NOTE 3: Technical telephone support applies only to HP-configured Compaq and third-party HP-
qualified hardware and software. Toll-free calling and 24 x 7 support may not be available in
some countries.
DA – 12605 EMEA • Version 1 • March 14, 2007
HP Compaq dx2250 Microtower Business PC
Storage
Operating
Non-Operating
Listed are the levels of shock the product can withstand with NO
damage being incurred. The values represent peak input acceleration
during an 2~3 ms half-sine shock pulse, 11 ms trapezoidal shock
pulse.
Non-Operating
Listed are the levels of vibration the product can withstand with NO
damage being incurred. The values represent a flat random vibration
input acceleration profile across the given frequency range.
Operating
Non-Operating
10% to 95% relative humidity (Rh), 101.66°F
(38.7°C) maximum wet bulb temperature,
non-condensing
0 to 10,000 feet (0 to 3048 meters) – This
value may be limited by the type and number
of options installed. Maximum allowable
altitude change rate is 1,000 ft/min (304.8
m/min).
0 to 30,000 feet (0 to 9,144 meters) –
Maximum allowable altitude change rate is
1200 ft/min (365.76 m/min).
40 g (Half-sine Shock)
40 g (Trapezoidal Shock)
Random vibration at 5Hz@0.00025G•/Hz,
10Hz@0.01G•/Hz, 100Hz@0.01G•/Hz,
300Hz@0.00001G•/Hz
5Hz to 300Hz, (0.25G's nominal).
Random vibration at 0.008G•/Hz,
10Hz to 500Hz, (2 Grms nominal).
Note 3
24 x 7.
Page 10