Protect The Environment - Remington 1000 WATTS Manual

ENGLISH
This product is fitted with a BS1363 plug fused at 13A. If the plug is unsuitable, it should be
disconnected and an appropriate plug fitted as detailed below. If it is necessary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at 13A. If in doubt consult
a qualified electrician.
The wires in the mains lead are coloured in accordance with following code:
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
- The wire which is coloured BLUE must be connected to the terminal which is marked
'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the
terminal which is marked 'L' or coloured RED. Never connect either of the wires to the big
EARTH terminal marked 'E' or coloured GREEN or GREEN AND YELLOW.
Do not dispose the product in household waste at the end of its useful life. Disposal can
take place at the Remington
100589_REM_IFU_D0100_21L.indd GB_3 100589_REM_IFU_D0100_21L.indd GB_3
WIRING INSTRUCTIONS UK PLUGS ONLY
BLUE - NEUTRAL
BROWN - LIVE

PROTECT THE ENVIRONMENT

®
Service Centre or appropriate collection sites.
For further information on recycling see www.remington-europe.com
3
12.08.10 20:49 12.08.10 20:49