Acura 2007 RDX Owner's Manual page 388

Main Menu
Table of Contents
Changing a Flat Tire
WING BOLT for normal tire
JACK
5. Remove the tools, wing bolt and
the jack. To remove the jack, turn
the jack's end bracket
counterclockwise to loosen it.
384
TOOLS
WHEEL NUT WRENCH
6. Loosen the five wheel nuts 1/2
turn with the wheel nut wrench.
WHEEL NUTS
WHEEL NUTS
JACKING POINT
7. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.