Check Operation - Whirlpool 30'' Electric Freestanding Range Installation Instructions Manual

Check operation
FRONT
OFF
15
Check the operation of the cooktop
n
elements: Push in and turn each
surface unit control knob to "HI" position. Check
the operation of the cook-top elements and
indicator lights.
16
Check the operation of the oven and
n
broil elements: Follow the instructions
for your type oven controls.
OVEN TEMP SELECTOR
OFF OFF
HEATING
0
If your range has oven selector and
temperature control knobs:
1. Set the oven selector control to "BAKE" and
the oven temperature control to 350°F.
l
The bottom elements should glow red and
the indicator light should be on.
l
The upper element should become hot but
not glow red. The oven indicator light goes
off when the oven is preheated.
2. Set the oven selector control to "BROIL" and
the oven temperature control to "BROIL."
l
The upper element should glow red and the
indicator light should be on.
3. Turn the control knobs to the "OFF" position.
DOOR LOCKED
lf your oven has electronic control pads
l
The upper element should become hot, but not
only (no timer):
glow red.
1. Press the "BAKE" pad.
The oven is preheated when the "PREHEAT"
l
The "BAKE" indicator and "35O'F" will appear in
indicator light goes off and the countdown is
finished.
the display.
l
The "START ?" indicator will begin to flash.
3. Press the "OFF/CANCEL" pad.
2. Press the START/ENTER pad.
4. Press the "CUSTOM BROIL" pad.
l
The "PREHEAT," 11 BAKE," and "ON" indicators
l
"500°F" and "BROIL" will appear in the display.
will aooear.
l
The "START ?" indicator will begin to flash.
l
The display will show the automatic countdown
time (8 minutes) needed to preheat the oven for
5. Press the "START/ENTER" pad.
selected temperature.
l
The "BROIL" and "ON" indicators will appear.
l
The bottom element should glow red.
l
The upper element should glow red.
6. Press the "OFF/CANCEL" pad.
lf your oven has electronic control pads
and a timer:
1. Press the "BAKE" pad.
l
The "BAKE" indicator and "350°F" will appear in
the display.
2. Press the START/ENTER pad.
l
"PRE"F," "HEAT," "BAKE," "ON" and "8:OO"
indicators will appear in the display.
l
The bottom eiement should glow red.
l
The upper element should become hot but not
glow red.
The oven is preheated when the time in the display
counts down to "O:OO," you hear a l-second tone,
and "PRE"F" changes to "350°F."
3. Press the "OFF/CANCEL" pad.
4. Press the "CUSTOM BROIL" pad.
l
"500°F" and "BROIL" will appear in the display.
5. Press the "START/ENTER" pad.
l
"5OO"F, " "HEAT," "BROIL," and "ON" will
appear on the display.
l
The upper element should glow red.
6. Press the "OFF/CANCEL" pad
To
get the most efficient use
from your new electric range,
read your Use and Care Guide.
Keep Installation Instructions and
Guide close to the electric range
for easy reference.
Page 5