Viewing The Routes - Honda 2009 Accord Navigation Manual

Main Menu
Driving to Your Destination

Viewing the Routes

Selecting View Routes on the
Calculate route to screen allows you to
scroll through and view the various
routes (Direct, Easy, Maximize
Freeways, etc.) to your destination. If
you select View Routes, the display
changes to :
NOTE:
• The selected route method and
pertinent details are shown at the top
of the screen.
• It may take several minutes (the
system displays an hourglass while it
is calculating) to show all route
methods, and it is not unusual for the
different methods to pick the same
route. Voice commands cannot be
used while the system is calculating.
48 Navigation System
• If the trip is greater than 100 miles,
then "Minimize Toll Roads" and
"Minimize Freeways" may be grayed
out. This is normal.
• Zoom IN/OUT to view route details
is not available on this screen. After
you choose a "route method," you
can then zoom in or out on the map
screen to view your route in details.
Say or select SUMMARY to display the
distance and time to go for each route.
Based on the route data, you can change
the routing method by rotating the
Interface Dial knob. Once you
confirm your selection, say the number
of the desired routing method or push in
on the Interface Dial.
NOTE:
Distances and times shown for each
method in the Summary are
approximate.
2009 Accord
After calculating the route with the new
method, the system displays a map of
your current location. The calculated
route will be highlighted as a blue line,
and a voice prompt will tell you how to
proceed along the highlighted route.
Push in on the Interface Dial and
select Voice to have the guidance
repeated.