SC3129 User Guide • Please ensure the phone is placed in a dry and ventilated place without corrosive air. • Please install 4 x AA batteries for viewing the LCD display. If the LCD does not display clearly, please change the batteries.
4 otherwise, one or more phones may not ring and/or answer calls correctly. SC3129 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.
Page 6
SC3129 User Guide SET key to move to next item. AREA CODE LCD panel display SET 2 CODE, press SET key to confirm, LCD display CODE, press SET key to enter this mode. Use UP/- or DOWN/+ key to select value, then press SET key to move to next item.
SC3129 User Guide 4. FUNCTION KEY OPERATION UP/- key and DOWN/+ key In any mode, press either key to check all the incoming numbers. If there is no incoming number, the unit will display END. The unit can receive up to 16-digit phone numbers.
SC3129 User Guide When checking the incoming number or outgoing number, press REDIAL/BACK key to auto pick up and dial out the number directly. HF (HANDSFREE) key While on-hook, press the HF key to go into handsfree mode. You can talk through the microphone and listen from the speakerphone without lifting the handset.
EC Low Voltage Directive 73/23/EEC • EC EMC Directive 89/336/EEC And conforms to the following relevant harmonized standards: • EMC: EN55022, EN55024 • Safety: EN 60950 Created on 28 October 2005. SC3129 Caller ID Phone. Please visit us at www.shirocorp.com.
Need help?
Do you have a question about the SC3129 and is the answer not in the manual?
Questions and answers