Honda 2006 Accord Sedan Owner's Manual page 126

For Vehicles with in-dash CD Changer
Press the LOAD button until you
1.
hear a beep and see ''LOAd'' in the
display.
2. The disc number for an empty
position is highlighted and the red
light starts blinking.
3. Insert the disc into the CD slot
when the green CD load indicator
comes on. Insert it only about
halfway; the drive will pull it in the
rest of the way. You will see
''BUSY'' in the display as the CD
load indicator turns red and blinks
as the CD is loaded.
4. When the CD load indicator turns
green and ''LOAD'' appears in the
screen again, insert the next CD in
the slot.
Repeat steps 1 through 3 until all
5.
six positions are loaded. If you are
not loading all six positions, the
system begins playing the last CD
loaded.
You can also load a CD into an empty
position while a CD is playing. Select
the empty position (the disc number
indicator is not highlighted) and
press the appropriate preset bar or
touch a disc icon. The current CD
stops playing and starts the loading
sequence. The CD just loaded will
play.
You operate the CD changer with
the same controls used for the radio.
The numbers of the disc and track
playing are shown in the display. On
vehicles with navigation system,
these numbers also appear in the
upper display.
Playing a CD, CD Changer
For Vehicles with in-dash CD Changer
To select a different disc, press the
appropriate side of a preset bar
(1 6) or use the Preset 5 (DISC
to select the previous disc or Preset
6 (DISC ) to select the next disc in
sequence. On vehicles with
navigation system, touch the
appropriate disc icon or press the
or side of the CH/DISC bar. If
you select an empty position in the
CD changer, the system will try to
load the CD in the next available slot.
)
125