®Powmascables Everyday Control with Beo4, Beo5, Beo6 Everyday Control with BeoLink 1000 Select Select Maneuvering in menus Maneuvering in menus Maneuvering in menus Maneuvering in menus Power on/ off Power on/ off Menu Menu Favorite list Favorite list Store – favorite Store favorite Mode –...
Factory Settings ................................4 Functions ..................................5 My MediaU ..................................5 Create a MediaU Account............................5 Internet Radio ................................. 5 Create a List of Favorite Stations..........................5 Media Center .................................. 5 UPnP, Play Music from PCs on the LAN........................5 Installation .................................
®Powmascables Getting Started This BOSSCOM Internet-Radio has been designed for operation in a Bang & Olufsen remote control system allowing full control with a Bang & Olufsen remote control terminal either directly or via connection to Bang & Olufsen equipment.
®Powmascables Direct Mode or CableLink Mode The BOSSCOM Internet-Radio tuner is connected to Bang & Olufsen equipment via the 7-pin DIN cable with or without adaptor, and through option programming it may be controlled as follows: 1. Via the tuner’s built in IR-receiver, ”Direct Mode”...
Create a List of Favorite Stations. 250 favorite stations may be stored in the Internet-Radio. 1. Press and select Internet Radio with 2. Select a station from one of the sub-menus, like Local Radio/Denmark/DAB. 3. Press to store the favorite list.
®Powmascables Installation Internet-Radio, Initial Set Up Connect the Internet-Radio tuner’s external power supply to a mains outlet and to the tuner’s DC-socket. 1) Turn on the tuner’s power switch on the cabinet’s rear. 2) Turn on Internet-Radio by pressing N.MUSIC, A.MEM2 or TAPE2 followed by See Option Programming p.8 if another source selection is requested.
Internet-Radio Connection to Bang & Olufsen Equipment This BOSSCOM Internet-Radio tuner connects to ALL Bang & Olufsen equipment having a vacant audio input, like BeoSound, BeoCenter, BeoMaster, BeoSystem or BeoVision TV, and it is controlled by a Bang & Olufsen remote control terminal.
®Powmascables Option Programming Option programming is required only when installing the tuner. The programming is performed with a Bang & Olufsen remote control terminal by initiating a 5 key sequence within 8 seconds after powering up the tuner. When powering up the tuner the red control LED flashes for 8 seconds, and the programming has to be carried out before the control LED stops flashing.
The following tables show the available input sockets on various Bang & Olufsen audio and video products, how to select them using a remote control terminal and what the corresponding option program of the One Remote Internet-Radio tuner should be. The BOSSCOM Internet-Radio tuner has to be programmed with the right option to operate correctly: Input Source Selected...
Page 11
Direct CableLink Remarks Socket Option Option The input is RCA phono BeoSound 4 sockets. Use a BOSSCOM adaptor cable item 13128090. If the MasterLink socket is MasterLink not used, the Internet-Radio tuner might be connected and operated via a BeoLink Converter.
Page 12
®Powmascables Input Source Selected Direct CableLink Remarks Socket Option Option BeoSound 9000 Input Direct CableLink Source Selected Remarks Socket Option Option BeoSound 3000 BeoSound 3200 Input Source Selected Direct CableLink Remarks Socket Option Option BeoSound Ouverture In the CableLink mode numeric commands are not accepted.
Page 13
®Powmascables Input Source Selected Direct CableLink Remarks Socket Option Option In the CableLink mode BeoSystem 2500 numeric commands are not BeoCenter 2500 accepted. In the CableLink mode numeric commands are not accepted. In the CableLink mode numeric commands are not accepted.
Page 14
®Powmascables Input Socket Source Selected Direct CableLink Remarks Option Option In the CableLink mode numeric BeoMaster 3500 commands are not accepted. BeoMaster 4500 In the CableLink mode numeric commands are not accepted. In the CableLink mode numeric commands are not accepted. In the CableLink mode numeric PHONO commands are not accepted.
Page 15
The input is a scart socket, BeoSystem 3 21 pin AV socket. Use a BOSSCOM adaptor cable item 13148090. The input is RCA phono sockets. Use a BOSSCOM adaptor cable item 13128090. If the socket is not used, the MasterLink etc.
Connection via a BeoLink Converter 1611/ 1612 The BOSSCOM Internet-Radio tuner may be connected to a Bang & Olufsen stand-alone audio or video master, TV, via a BeoLink Converter using MasterLink and the AAL inputs. Connected to an audio master and programmed as a ”video source”...
Connection via a BeoLink Active in any Link Room The BOSSCOM Internet-Radio tuner may be connected to a Bang & Olufsen BeoLink Active with a vacant ‘PC’ socket. Thus active speakers in any link room allow for the installation of the Internet-Radio tuner and the opportunity of having a local radio source controlled directly with the Bang &...
Remarks Socket Option Option The input is a scart socket, a All B&O TV models Scart 21 pin AV socket. Use a BOSSCOM adaptor cable BeoVision 10 AV1 - AV6 item 13148090. BeoVision 8 NOT the BeoVision 7 DECODER BeoVision 6...
Need help?
Do you have a question about the Internet Radio and is the answer not in the manual?
Questions and answers