Installing The Encoder - NeoMedia Encoder PDF417 Installation Manual

PDF417
License for specific details on which fonts have been licensed for use. Use of unlicensed fonts is a
violation of the Standard Software License and is strictly prohibited.

Installing the Encoder

The installation media for MVS is in IEBCOPY format. As part of the installation process, three
libraries must be copied from tape into three PDS. The following tables list the PDS space and
DCB requirements, and each PDS contents. NOTE: The Vxxxx is the PDF417 encoder version
indicator. The label on your distribution will provide the proper version information for this
distribution. For any future installation instructions in this document, fill in the xxxx with the
appropriate version.
•
Insert the media into the tape drive.
•
Submit the restore media JCL that you have written. (See below for a JCL example.)
Library
NEOMEDIA.PDF417.LOADLIB
NEOMEDIA.PDF417.RSCLIB
NEOMEDIA.PDF417.OBJLIB
NEOMEDIA.PDF417.FNTLIB
Library
NEOMEDIA.PDF417.LOADLIB
NEOMEDIA.PDF417.RSCLIB
NEOMEDIA.PDF417.OBJLIB
NEOMEDIA.PDF417.FNTLIB
NeoMedia Technologies, Inc.
The tape media contains the following STD files:
Library
NEO.PDFRSC.Vxxxx
NEO.PDFOBJ.Vxxxx
NEO.PDFFNT.Vxxxx
The following PDS will be created during installation:
DCBs for the above created PDS:
Contents of the NEOMEDIA.PDF417.RSCLIB:
Object Description
README README text file.
PDFENC C #include file.
PDFDEFS C #include file.
PDFREND C #include file.
IPDFLNK Sample JCL for linking encoder objects
into a load module.
Space
SPACE=(CYL,(1,1,15),RLSE)
SPACE=(CYL,(1,1,15),RLSE)
SPACE=(CYL,(1,1,15),RLSE)
SPACE=(CYL,(1,1,15),RLSE)
LRECL BLKSIZE
N/A 32670
80 23440
80 3200
12284 27998
Installation Guide
RECFM DSORG
U PO
FB PO
FB PO
VBM PO
Page 14