Mazda Navigation system User Manual page 105

Note
lIf "Not supported" is displayed on the Bluetooth Device Setting screen, the device is not
supported for use with a Hands-free mobile phone or Bluetooth audio device.
lIf "Disconnected" is displayed on the Bluetooth Device Setting screen, the device is
supported for use with a Hands-free mobile phone or Bluetooth audio device, but cannot be
used because it is not connected. If the
connected and becomes enabled.
lIf "Connected" is displayed, the device is supported for use with a Hands-free mobile phone
or Bluetooth audio device, and is currently being enabled.
How to use the Bluetooth Audio system
n
Switching to Bluetooth audio mode
To listen music or voice audio recorded to a Bluetooth audio device, switch to the Bluetooth audio
mode to operate the audio device using the audio system or navigation system control panels.
Any Bluetooth audio device must be paired to the vehicle's Bluetooth unit before it can be
used. Refer to "Bluetooth audio device pairing". (
Note
lIf playback is not possible, press the
device settings.
lIf the mode is switched from Bluetooth audio mode to another mode (radio mode), audio
playback from the Bluetooth audio device stops.
lIf a call is received on a hands-free mobile phone during playback from the Bluetooth audio
device, the playback is stopped. Playback from the Bluetooth audio device resumes after
the call ends.
Playback
on-screen button is pressed, the device is
page 100)
1. Press the SOURCE button.
2. Press the on-screen button.
3. The audio recorded to the Bluetooth audio
device begins playback.
on-screen button after checking the Bluetooth
1. Press the SOURCE button.
2. To listen to a Bluetooth audio device over the
vehicle's speaker system, switch the mode to
Bluetooth audio mode. Refer to "Switching to
Bluetooth audio mode".
105