North Star M11954H Owner's Manual page 12

3. Attach to hitch (2"
Ball)
4. Attach safety
chains
Moving & Towing to the Job Site
Attach log splitter to vehicle hitch
Attach log splitter's coupler to a class 2 or higher hitch with 2" ball (only).
1.
2. Adjust coupler to ball by raising locking lever and turning lock nut with fingers.
3. Proper adjustment is obtained when coupler is as tight as possible on ball and locking
lever can still be opened and closed.
4. Lock lever closed to secure the attachment. An optional locking pin or padlock may
be inserted in the locking lever hole for extra security.
Housing
Ball Clamp
Lock Nut
Attach safety chains.
1. Two safety chains must be used while towing.
2. Cross safety chains under the coupler allowing only enough slack for vehicle turns.
(unlocked position)
Light Spring
Heavy Spring
Channel Lock
12
Locking Lever
(locked position)
Fig02017