Specifications; Subwoofer Channel - Phoenix Gold TI2 1600.5 User Manual

4/5 channel power amplifier
Table of Contents

Advertisement

SPECIFICA TIONS
Ti2 1000.4 SPECIFICATIONS
Frequency Response:
Signal to Noise Ratio:
Crossover Slopes:
Front High/Low Pass Crossover Range:
Rear High Pass Crossover Range:
Rear Low Pass Crossover Range:
Low Level Input Range:
Lowest Recommend Load:
Typical Efficiency:
Damping Factor
Ti2 1600.5 SPECIFICATIONS
FRONT AND REAR CHANNELS:
Frequency Response:
Signal to Noise Ratio:
Crossover Slopes:
Front High Pass Crossover Range:
Rear High Pass Crossover Range:
Rear Low Pass Crossover Range:
Low Level Input Range:
Lowest Recommend Load:
Typical Efficiency:
Damping Factor

SUBWOOFER CHANNEL:

Frequency Response:
Signal to Noise Ratio:
Crossover Slopes:
Low Pass Crossover Range:
Subsonic Crossover Range:
Variable Phase:
Low Level Input Range:
Lowest Recommend Load:
Typical Efficiency:
Damping Factor:
POWER OUTPUT NOTE: A power birth certificate is included for each amplifier. Ti2
amplifiers are conservatively rated and will exceed their RMS power rating shown
here. All RMS power ratings and measurements are at 14.4 volts with no more than
1% THD. Ti2 1000.4 and Ti2 1600.5 feature ADAPT technology which provides the
same power output from 11 to 15 volts with music material.
www.phoenixgold.com
± 1dB from 20Hz to 20kHz
>100dB
12dB per Octave
45Hz to 4kHz
20Hz to 4kHz
40Hz to 4kHz
200 millivolts to 8 volts
4 ohms Bridged/2 ohms Stereo
80%
Greater than 200
± 1dB from 20Hz to 20kHz
>100dB
12dB per Octave
20Hz to 4kHz
20Hz to 4kHz
40Hz to 4kHz
200 millivolts to 8 volts
4 ohms Bridged/2 ohms Stereo
80%
Greater than 200
± 1dB from 20Hz to 300Hz
>100dB
12dB per Octave
20Hz to 300Hz
10Hz to 50Hz
0 to 180 degrees
200 millivolts to 8 volts
2 ohms
80%
Greater than 200
RMS Power Output
Power/Ground Wire Size:
Recommend Power Wire Fuse:
Dimensions:
RMS Power Output
RMS Power Output
Recommend Power Wire Fuse:
Power/Ground Wire Size:
Dimensions:
Amplifier Owner's Manual
150w x 4 @ 4 ohms Stereo
250w x 4 @ 2 ohms Stereo
500w x 2 @ 4 ohms Bridged
4 Gauge
80a
11.7" L x 7.1" W x 2.0" H
296mm L x 180mm W x 52mm H
125w x 4 @ 4 ohms Stereo
200w x 4 @ 2 ohms Stereo
400w x 2 @ 4 ohms Bridged
500w x 1 @ 4 ohms
800w x 1 @ 2 ohms
100a
4 Gauge
14.4" L x 7.1" W x 2.0" H
366mm L x 180mm W x 52mm H

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti2 1000.4

Table of Contents