Front and Rear Panel Layout Operating the S split Setting Up the S split Typical Set-up Wiring Guide Specifications Copyright 2003, Samson Technologies Corp. Printed June 2003 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www.samsontech.com...
S split Introduction and Features Introduction Congratulations on your purchase of the S split by Samson Audio! The S split is a one- by-three microphone splitter featuring a direct microphone through output, along with two transformer isolated microphone outputs. The S split is a perfect solution for applications...
S split Front and Rear Panel Layout Front Panel Layout ISOLATION 2 GND LIFT- When engaged ISOLATION 1 GND LIFT- When the ground from the Isolated Mic engaged the ground from the Output 2 is disconnected. Isolated Mic Output 2 is discon- nected.
Operating the S split Setting Up the S split The basic procedure for setting up and using your S split is simple and takes only a few minutes. Remove all packing materials (save them in case of need for future service). There are many different ways to use the S split, however the basic connection is the same in most installations and applications.
Operating the S split Typical Set-up The diagram below shows a typical set-up for live sound and recording, where the signal from one microphone is split and sent to a recorder (with mic-pre input), a monitor mixer and to the main front-of-house mixer.
S split Wiring Guide Wiring Guide There are several ways to interface the S split, depending on your exact set-up. Follow the cable dia- grams below for connecting your gear.
<-90 dBu Dimensions 5.65” L x 4.13” W x 2” H (144mm L x 105mm W x 51mm H) Weight 16.5 oz., 419 gm. Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888...