Olympus iS-3 DLX Instructions Manual page 57

Aim the remote control at the camera from within the range shown in
the illustrations below, and press the button. The shutter will be released
after the autofocus beep is heard and the AF illuminator blinks.
When releasing the shutter from in front of the
camera:
Notes:
Use selftimer outside this range.
When the IS/L B-28 H.Q. CONVERTER 0.8X is
mounted, the remote control may not work even
within the above range because the signal
transmission is blocked by the converter.
Important: After the shot(s), be sure to press the selftimer/remote control button again to cancel the
Remote Control mode.
When releasing the shutter from behind the
camera:
Notes:
Use the remote control from behind the camera to prevent
the camera from shaking by pressing the shutter release
button when in macro photography or when the tele-
converter is mounted.
When using the remote control from behind the camera,
aim at the remote control sensor on the top of the grip.
57