Standard Cmos Setup Page - ECS Mainboard User Manual

Standard CMOS Setup Page

This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
System Time:
System Date:
Primary IDE Master : Auto
Primary IDE Slave : Auto
Secondary IDE Master : Auto
Secondary IDE Slave : Auto
Floppy Drive A : 1.44 MB 3 1/2
Floppy Drive B : Disabled
Date & Time These items set up system date and time.
IDE These items configure devices connected to
Primary Master
the Primary and Secondary IDE channels.
Primary Slave
To configure an IDE hard disk drive, choose
Secondary Master
Auto. If the Auto setting fails to find a hard
Secondary Slave
disk drive, set it to User, and then fill in the
hard disk characteristics (Size, Cyls, etc.)
manually. If you have a CD-ROM drive,
select the setting CDROM. If you have an
ATAPI device with removable media (e.g. a
ZIP drive or an LS-120), select Floptical.
Floppy Drive A These items set up size and capacity of the
Floppy Drive B floppy diskette drive(s) installed in the
system.
Standard CMOS Setup
00:00:10
Fri 10/24/2003
22
Help Item
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system
time.