Download Print this page

Whirlpool 3183636 Installation Instructions Manual page 6

24” and 27” electric built-in single and double ovens

Advertisement

Replace
the oven racks.
Replace
the single oven or upper double
oven door
by partially
fitting the door
hinges into the hinge slots. Pull door slightly
toward
you; then slide door completely
in
place.
Reinstall the two oven-door
screws
(if required
for your oven door). If door
does not close, you have not pushed
hinges completely
into frame. Repeat
for
lower oven door.
11
n
Turn on the power supply.
'PF"
should appear
in the'temperature
display
and "88:88" should appear
in the
clock display.
Press the "CLOCK/SET"
button.
'TIME, HR AND MIN" will light in
the display.
'0:OO" will appear
and ":" will
be flashing.
Press the "HOUR" and
"MINUTE" arrows to set the clock to the
correct
time of day. Press the
"START/ENTER" button
to start the clock.
12
n
Check the operation
of the
single oven or upper oven. Press the
"BAKE" but-ton. '350"" will appear
in the
display.
Press the "START/ENTER" button
to start the bake operation.
In 1-2
minutes, the bottom
element
should
glow red. The upper element
should
become
hot, but not glow red. The
single or upper oven indicator
light
should be on and the oven should be
heating.
The oven indicator
light goes off when
the oven is preheated.
Press the "OFF/CANCEL"
button,
TEMPERATURE
SELECTOR
0
0
-
Check
the operation
of the lower oven.
Set the oven selector
control
knob to
'BAKE." Set the oven temperature
control
knob to "350°F." In l-2 minutes, the
bottom
element
should glow red. The
upper element
should become
hot, but
not glow red. The lower oven indicator
light should be on and the oven should
be heating.
The oven indicator
light goes off when
the oven is preheated.
Turn the oven selector
and temperature
control
knobs to 'OFF."
13
n
Check the operation
of the
single or upper oven broil element.
Press
the "BROIL" button.
"500"" will appear
in
the display.
Press the 'START/ENTER"
button
to start the broil operation.
In l-2
minutes, the upper element
should glow
red. The single or upper oven indicator
light should be on and the oven should
be heating.
Press the "OFF/CANCEL"
button.
TEMPERATURE
SELECTOR
0
0
Check the operation
of the lower oven
broil element.
Set the oven selector
and
oven temperature
control
knobs to
"BROIL." In l-2 minutes, the upper
element
should glow red. The lower
oven indicator
light should be on and
the oven should be heating.
Turn the oven selector
and temperature
control
knobs to "OFF."
f
You have just finished
installing
your new Whirlpool
oven. To get the most efficient
use from your new oven, read
your Whirlpool
Use & Care Guide.
I
Congratulations!
I
and Guide close to oven for easy
~~~~~~~
Panel E

Advertisement

loading