Timer Recording - Topfield TF 4000 PVR Plus User Manual

64 Recording and Playing

7.1.3 Timer recording

You can set a service to be recorded at a specific time. Even
if the digital receiver is in standby mode, it will switch into
operation mode and start recording at the specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again in one minute. However, if
you press any button on the remote control or on the front
panel even just one time, the digital receiver will not switch
into standby mode.
1. Set the Record option to On to make a recording. If this
option is set to Off, the digital receiver will turn on at the
specified time but not record; instead, you may record
with your video cassette recorder or suchlike in this case.
2. If you want a radio programme, set the Type option to
Radio; otherwise, set it to TV.
3. Set the Satellite option to the satellite which transmits the
service you want. Pressing the
displays a satellite list, from which you can select your
desired satellite. Set the Tuner Select option to a tuner to
receive your desired service.
4. Set the Service option to the service which provides the
programme you want. Pressing the
To input a timer recording, select
the System Setting
ting menu; then the timer list will
be displayed.
To add a new timer event, press
the button, and a box like the
left figure appears. Take the fol-
lowing steps:
button on this option
OK
button on this
OK
Timer Set-