Using Voice Commander
To make a phone call using voice commander:
1. Tap Start > Programs > Voice Commander.
2. From the following screen, your device
asks you to "Say command."
3. Audibly say "Call" then the name to call
from your Contact list.
4. Say "Yes" or "No" after the
confirmation question.
If you said "Yes", the application
proceeds and dials the number;
otherwise, it returns to the Voice
Commander menu.
5. Say "Goodbye" or tap
Commander.
NOTE:
To use Voice Commander while using a headset, press the answer button* on the headset then follow given
instructions. (* Answer button may not be available in some headset models.)
Setting Voice Commander shortcut button
To set a shortcut button for the voice commander:
1. Tap Start > Settings > Personal tab > Buttons.
2. Tap Button to highlight it.
3. Tap the Assign a program: bar and then tap the Voice Commander from the menu.
4. Tap
when done.
After the setting, you can launch the Voice Commander by pressing the Record button
the left side of the device.
to exit Voice
from