10
ASSEMBLING AND PREPARING
NOTE
How to use the ferrite core (Depending upon model)
y
- If there are three ferrite cores, follow as shown in Figure 1 and Figure 2.
- If there are four ferrite cores, follow as shown in Figure 1, Figure 2 and Figure 3.
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a
wall plug.
[to a wall plug]
2 Use the ferrite core to reduce the electromagnetic interference in the LAN cable.
Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.
[to an External device]
3 Use the ferrite core to reduce the electromagnetic interference in the cable.
Wind the component cable on the ferrite core once. Place the ferrite core close to the TV.
[to an External device]
[Figure 1]
10 mm(+ / - 5 mm)
[Figure 2]
[Figure 3]
10 mm(+ / - 5 mm)
(Black)
[to the TV]
[Cross Section of
Ferrite Core]
[to the TV]
[Cross Section of
Ferrite Core]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]