With a modern and proprietary design this subwoofer is the result of a combination of advanced Acoustic Engineering and state-of-the-art manufacturing. BRAVOX engineers have managed to blend some of the car audio industry’s most innovative technologies and the latest 21 century materials into the BVX subwoofer series.
For best performance the walls of the enclosure should be rigid and not vibrate as a result of the internal pressures generated by the loudspeakers. BRAVOX recommends constructing enclosures from medium-density fiberboard (MDF) with a minimum thickness of 3/4”. In larger enclosures over 1 cubic foot, internal bracing that joins opposite walls can be incorporated and the final enclosure should be as rigid as possible.
Page 5
External Dimensions Response (cu.ft) H x W x D (in.) (cu.ft) Dv (in.) Lv (in.) H x W x D (in.) BVX12D 2 Normal 1.66 16.1 x 16.1 x 14.8 1.66 4“ 15.3 13.8 x 13.8 x 20.5 BVX12D 4 Enhanced 0.76...
WIRING BVX SUBWOOFERS are offered in Dual Voice Coil configuration in two versions, 2+2 and 4+4 ohms. This allows the user to create virtually any impedance load to match his amplifier. Further the terminals for each coil are located in the same side thus easing its connection to the amplifier. PARALLEL WIRING BVX 12 D 2 BVX 12 D 4...