Microphone Connection - audioscan RM500SL User Manual

2.3

Microphone connection

1) Plug the reference microphone and the coupler microphone into the connectors
in the test chamber as shown.
2) Plug the probe
microphone assembly
into the probe connector
located at the left of the
test chamber as shown.
NOTE: A microphone
extension cable (VA-130) is
available from Audioscan.
Standard audio extension
cables should not be used.
They will substantially
increase noise levels.
FastFacts 2.3: Microphone connection
0611 RM500SL User's Guide Version 2.8 Page 11