Remarks for PC users and Microsoft Windows OS Remarks for Mac users and Apple Macintosh OS The K5 The 'K5' features a fanless design, easy handling plus quick and simple installation, making this a user friendly and high performance storage solution. This external enclosure/casing is made for a single 5.25"...
Chapter 2 - Installing the Drive Preparing the Enclosure Press the clips on both sides, one by one, and remove the top Your unit might cover. come with an installed drive. Before opening such an enclosure, please read the warranty and any other notes from your vendor carefully before...
Page 6
Drive Assembly Connect the ATA cable and the power line to your drive. Install the drive and fasten it with four screws. Align the top cover with the body and press gently, so that the clips snap into place. The jumper settings Replace the feet as shown below and then connect your power of the drive should adapter and interface cable.
Chapter 3 - System Set Up Connection to your Computer Most problems A few tips on how to connect your external storage enclosure: occur due to driver • Make sure your PCI Host Card is installed correctly problems on the •...
• Insert the driver CD into your internal CD-ROM upgrade your OS to • Connect the K5 and turn it on (in some cases the driver Win98SE or higher. must be installed before connecting the device, see note on CD or readme file) •...
If the system connection: • Turn on your computer and start Mac OS doesn’t recognize • Connect the K5 and turn it on the drive, turn on • No driver installation required the power first, • The external drive will mount and show up on your...
USB/Firewire extensions for possible conflicts. About this Manual This manual covers all interfaces and combinations for the ‘K5’ Enclosure. Images and descriptions might therefore slightly vary between this manual and the actual product you have. Please read your warranty carefully,...
Need help?
Do you have a question about the K5 and is the answer not in the manual?
Questions and answers