Table of Contents
Advertisement
7. Horizontal headlamp aim (low
beams on):
Turn adjusting screw (5) (Right
front headlamp: counterclockwise to
adjust to the left, clockwise to the
right; left front headlamp:
counterclockwise to adjust to the
right, clockwise to the left.) until the
headlamps (low beam) illuminate
the test screen as shown. The vertex
of the angle formed in each beam
image should align with the vertical
centerline (10) of each lamp.
The left and right headlamps must
be adjusted individually.
8. The indicator (6 and 8) in the sight
glass should align with the "0" mark
after any horizontal adjustment. If it
does not, slide the "0" mark on the
scale (7 and 9) until it aligns with
the indicator (6 and 8).
Graduations: 0.38° pitch.
9. Reinstall access cover (2).
118
Advertisement
Table of Contents
