NDC comm NWH4020 User Manual page 18

Step 3.
In the list of installed network components, select
Adapter
Step 4.
Click
You will be asked if you wish to remove the adapter or "disable" it.
Step 5.
Click
You will be asked if you wish to restart the computer.
Step 6.
Click
®
Microsoft Windows 2000 or XP: To remove the driver from a computer running
Windows 2000 or XP, carry out the following steps:
Step 1.
Disconnect the adapter.
The adapter can be connected or disconnected at any time. There is no
need to choose a "stop" command.
Step 2.
Open the desktop's
and open the
Step 3.
Click the
Step 4.
In the list titled
Step 5.
Click
window, and then close that window.
To remove the InstantWave Utility, open the desktop's
and choose, in order,
Alternatively, you can open the
, choose
Panel Add/Remove Programs
click
Add/Remove
12
.
.
Remove
.
OK
and allow the system to restart.
Yes
Start
icon.
System
tab, and then click
Hardware
Network Adapters
., click
Uninstall OK
,
Instantwave
Start
.
menu, go to
Settings
Device Manager
, select
as required to return to the
, and
HighRate utility
menu, go to
Settings
, select
Instantwave HighRate Utility
InstantWave
11-Mbps USB Wireless LAN Adapter
WLAN miniUSB
, choose
Control Panel
.
WLAN miniUSB Adapter
Control Panel
menu, go to
Start
Uninstall HighRate Utility
and then to
,
.
,
Programs
.
Control
, and