Power Source - Channel Master CM-6000 User Manual

Installation and Set-Up
A proper operating environment is required to safely utilize this product,
and to avoid malfunctions or damage to the unit. Do not place the
product where it may be subject to physical shock or vibration or where
the product may drop, topple, slide or shake, which may cause personal
injury or damage to the product not covered by the manufacturer's
warranty. Openings on the housing of the product are required for
ventilation. Do not block or obstruct the airflow through these openings.
Do not operate the product on a soft surface such as carpet, rug, bed, etc.
as these surfaces will obstruct airflow, may cause the product to overheat
and will invalidate the warranty. Do not install the product into any
bookcase, shelf or rack without ensuring that a minimum of 4" of clear
space is available at the front, rear, sides and top of the product. Do not
install the product where it may be exposed to direct sunlight or radiant,
convection or heat conducted from an open fire or radiator. The product
should not be placed on any surface that may become warm during use
(such as on top of a VCR or A/V amplifier) and nothing should be placed on
top of the product. Do not cover the product. Objects containing liquids,
such as vases, flowerpots, etc. must not be placed on top of the product.

Power Source

The product must ONLY be used with the power adapter supplied by the
manufacturer. If it is necessary to operate the product in another country
or geographical area with a different power source, an approved adapter
for that country or location must be obtained from your retailer. The
product and power supply will get warm to the touch during normal use.
5