SOYO SY-7VCM Quick Start Manual page 13

driver
VIA 4 in 1 driver package for Win 9x/NT
VIA Ac97 Codec Driver for Win 9x/NT/2000
VIA hardware monitor for (Win 95/98)
Cancel
OK
A short description of all available drivers follows:
Ø
VIA 4in1 driver package
The 4 in 1 driver package includes all drivers your motherboard needs. After selecting this
driver package, one driver will be installed automatically (the IRQ remapping utility), the
other three are installed if selected. By default all three drivers are selected. A description of
the 4 drivers follows:
 Bus Master PCI IDE Driver
This driver will speed up the data-transfer rate to and from the harddisk.
 AGP VxD Driver
This driver must be installed in order to be able to make use of the on-board AGP
Video functionality.
 VIA Chipset Functions Registry
This driver will make the necessary changes to the Windows registry, in order to
make sure that Windows has no problems recognizing your VIA chipset.
 IRQ remapping utility (This driver is installed automatically)
This utility will remap the IRQ lines to make sure that everything functions properly
under Windows.
Ø
VIA Ac97 Codec Driver for Win 95
You have to install the drivers before installing any application for the Ac97 codec.
Ø
VIA hardware monitor for (Win 95/98)
Your motherboard comes with a hardware monitoring IC. By installing this utility
Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms
when current system values exceed or fall below pre-set values.
SY-7VCM Quick Start Guide
(Driver Installation Menu)
13
revision: