Table of Contents
Advertisement
1
Charge your battery until the battery
icon indicates a full charge.
2
Tilt the USB charger connector upwards
to remove it.
Note:
1
If there are two USB cables in the kit
(USB cable for charging and USB
cable for data transferring. See the
illustrations as below), then the USB
cable for charging is only intended for
charging your phone. Do not use it for
transferring data.
The USB cable for the USB charger is
only intended for connection to the AC
adapter to charge your phone. It must
not be used for connection to a PC.
It can only be used for charging your
phone. Never use it for charging
accessories.
USB cable for charging
2
If there is only one USB cable in the
kit, it is intended for charging your
phone as well as transferring data.
This is the Internet version of the User's guide. © Print only for private use.
USB cable for transferring
3
If there is only one USB cable for the
USB charger in the phone kit, this USB
cable is only intended for charging your
phone.
4
Sony Ericsson strongly recommends
that you use only Sony Ericsson
branded original batteries, the part
of power supply device in accordance
with YD/T 1591-2006 specifications
of Communications Industry Standards
of P. R. China and the USB cable
supplied with your phone to charge
the phone. The use of third-party
products may decrease the
performance of your phone and/or
pose a risk to your health or safety.
You can charge the battery for more or
less than 2.5 hours. Interrupted charging
will not damage the battery.
Performance depends on temperatures,
signal strenth, usage patterns, features
selected and voice or data transmissions.
The stand-by time for this battery is up
to
330
hours.
Use only Sony Ericsson branded original
batteries intended for use with your
mobile phone. If you use other batteries
you may not be able to charge your phone.
Getting started
9
Advertisement
Table of Contents
