OPLENIC Pro-MicroScan User Manual

Microscope digital camera

Advertisement

User Manual
Pro-MicroScan
Microscope Digital Camera
BASIC USER MANUAL
Version 3.0
USB 2.0 CAMERA

Advertisement

Table of Contents
loading

Summary of Contents for OPLENIC Pro-MicroScan

  • Page 1 User Manual Pro-MicroScan Microscope Digital Camera BASIC USER MANUAL Version 3.0 USB 2.0 CAMERA...
  • Page 2: User Manual

    User Manual WARNING! TO AVO ID TH E RISK OF FIRE OR ELECT RICAL SHOCK. N EVER EXPOSE THIS PRO DUC T TO WATER OR OPER ATE IN A H IGH HU MID IT Y EN VIRONME NT. Keep camera away from the following: High temperatures and excessive humidity Direct sunlight or other heat sources Dust...
  • Page 3: Trademark And Copyright Information

    OPLENIC. The information contained in this document is subject to change without notice. OPLENIC shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance or use of this material.
  • Page 4: Warnings And Precautions

    User Manual Warnings and Precautions Precautions when using your Pro-MicroScan Keep camera away from the following: · High temperatures and excessive humidity · Direct sunlight or other heat sources · Dust · Extreme vibration If the imaging sensor lens becomes dirty, first try blowing dust particles from it.
  • Page 5: System Requirements

    User Manual System Requirements ® PC running either Windows XP or Vista, 2008 ♦ DirectX 9.0 or later installed ♦ 1.8 GHz minimum processor ♦ USB 2.0 Port ♦ CD-ROM drive ♦ 512 MB RAM(Recommend 1GB or more) ♦ 200 MB Free HDD Performance is dependent on the PC's graphics card.
  • Page 6: Package Contents

    User Manual Package Contents If you find any contents missing or damaged, contact the place of purchase 1 PCS EYEPIECE CAMERA 1 PCS DUST COVER 1 PCS MINI USB2.0 CABLE 1 PCS SOFTWARE CD (OPTION) *Software can be download from website DEM page for free. Installing the Software (If you do not have the software CD, skip this step.) 1.
  • Page 7: Using The Camera

    User Manual To Connect Camera Connect the USB cable into a free USB slot on the computer (Requires USB 2.0 interface). “New Hardware Found” displays at the bottom right of your PC screen. The camera is recognized. NOTE: 1.Plug the USB connector to board USB2.0 port directly on the back of the PC is recommend, 2.Do NOT use anything to extend the USB cable.
  • Page 8: Troubleshooting

    User Manual 6. Capture the Video and Still images Trouble Shooting WARNING: Please do not attempt to open the camera case. There are no user serviceable parts inside. USB Device Conflicts When there are a number of USB devices installed at the same time, unexpected errors can arise. The cause can be insufficient available USB bandwidth, or possibly too much combined current being drawn by USB devices.
  • Page 9 Video Mode: use smaller size video mode will get faster frame rate video Integration time / luminous intensity setting: longer Integration time and brighter illumination will make the frame rate faster. If you have any other problems, please visit our website to get help information http://www.oplenic.com/support.asp http://www.oplenic.com/faq.asp...
  • Page 10: Technical Data Sheet

    User Manual Technical Data Sheet Pro-MicroScan : digital eyepiece camera FOR microscope Part Number #5820 #5821 #5822 #5823 #5825 Sensitivity (v/lux-sec @550nm) Max Resolution 640X480 1280X1024 1600X1200 2048X1536 2592 X 1944 (Hardware) 0.3M pixels 1.3M pixels 2M pixels 3M pixels 5M pixels Full Res.
  • Page 11: Warranty

    OPLENIC shall use reasonable effort to repair or replace any accessory covered by this warranty within thirty days of receipt. In the event repair or replacement shall require more than thirty days, OPLENIC shall notify the customer accordingly. OPLENIC reserves the right to replace any product which has been discontinued from its product line with a new product of comparable value and function.

Table of Contents