CognitiveTPG A798 Setup Manual page 2

3
Choose a location for the printer.
4
Connect the following cables based on your con guration using a-b below.
When using USB (step "b" below), use
caution to ensure the USB cable is
connected to the USB connector
on the back left of the printer and
not into the cash drawer connector
that is on the right back of the printer.
a
Cash drawer (if your installation includes this feature, page 15).
b
9-pin or 25 pin Serial or USB cable (serial: page 16; USB: page 17).
c
Connect the power cable (page 18).
d
Route cables as shown for your setup con guration (page 19).