Using The Status Window; Restoring Factory Adjustments - HP MX50 Owner's Manual

5 Press the Select button to save your changes
and close the adjustment bar.
6 Press Exit to close the Moiré window.

Using the Status Window

The Status window is an information window that
displays the horizontal and vertical scan
frequencies, the resolution (for pre-set modes
only), and the serial number of the monitor.
To display the Status window:
1 In the OSD Advanced Menu window,
press the Plus (+) or Minus (–) button
to move to the Status icon.
2 Press the Select button to open the Status
window.
3 Press Select to close the Status window.
24
HP Pavilion MX50, MX70, and MX90 Multimedia Monitors
SERIAL NUMBER
AASDD12345
FV :70Hz
FH :31KHz
RESOLUTION:
640 X 480
E X I T

Restoring Factory Adjustments

I
To restore all parameters to the original factory
values:
1 Turn the power off.
2 While pressing the Plus (+) button, turn the
power back on.
STATUS
EXIT