Music Stand; Power Supply; Mains Supply; Battery Supply - Farfisa TK 89 User Manual

Music-stand
Insert the music-stand in the special holes located on the
backside of the keyboard.

Power supply

This electronic keyboard can function with mains or battery.

Mains supply

The instrument can be supplied by the AC/DC "ADS 1223"
(Vdc =12V / I = 2,25A) positive central adapter conforms to
national and international safety regulations covering electri-
cal appliances.
RECOMMENDATIONS: The socket (1) for the adapter plug
must be easily accessible. Inserting the plug into the socket at
the back of the instrument automatically cuts off supply from
the batteries. Ensure that the adapter is sufficiently ventilated
and that the ventilation slits are not covered with objects
such as newpapers, tablecloths, curtains, etc. Do not expose
the adapter to drops or splashes of water.
WARNING: All batteries or transformers with safety insulation
must be checked regularly for faults in cable, wire, or plug
insulation or other parts.

Battery supply

This instrument works with 8 x 1.5V IEC R14/C batteries (not
supplied) which are inserted in the housing at the bottom.
To open press on the
part of the lid mar-
ked OPEN. Fit the
batteries as shown at
the bottom of the
housing.
Using rechargeable
batteries (1,2V) does
not guarantee the
best contrast level on the display.
4
ADVICE ON USING THE BATTERIES
• Take worn batteries out.
• Recharge only "rechargeable" batteries and always in the
presence of an adult.
• Avoid using batteries of different types at the same time.
• Do not use combinations of new and worn batteries.
• Do not shortcircuit the power supply terminals.
• Do not expose the batteries to heat sources.
INSTRUMENT IDENTIFICATION
Always quote the serial number on the bottom of the keybo-
ard in any correspondence.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentio-
ned here below, please refer to Council Administration office
regarding specialised waste collection centres.
1. DISPOSAL OF BATTERIES
Protect the environment by disposing of
batteries in the special containers provided
for this use.
2. PACKAGING DISPOSAL
Take the paper, cardboard and corrugated board to the
(1)
appropriate waste collection centres. Plastic material must be
placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02
for PE-HD, 04 for PE-LD • PVC=Polyvinyl chloride • PP=
Polypropylene
PS= Polystyrene, Polystyrene foam • O= Other polymers (ABS,
Laminates, etc.)
3. WASTE DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
APPLIANCES
All articles displaying this symbol on the body,
packaging or instruction manual of same, must not
be thrown away into normal disposal bins but brou-
ght to specialised waste disposal centres.
Here, the various materials will be divided by cha-
racteristics and recycled, thus making an important contribu-
tion to environmental protection.
TK 89
MODEL SR
BONTEMPI S.p.A.
VIALE DON BOSCO, 35
RATING
12V 14W
62018 POTENZA PICENA (MC)
ITALY SER. N°.
G2858001
01 02 03 05
PET PE PVC PP PS
06 07
O