LG PLASMA TV Owner's Manual page 40

Miscellaneous
26. Low Power
(Command 1 : j, Command 2 : q)
G To reduce the power consumption of the monitor. You
can also adjust Low Power in SPECIAL menu.
Transmission
[j][q][ ][Set ID][ ][Data][ ][Cr]
Data 0 : Off
1 : On
Ack
[q][ ][Set ID][ ][OK][Data][x]
27. Orbiter Time Setting
(Command 1 : j, Command 2 : r)
G To adjust orbiter operation time term.
Transmission
[j][r][ ][Set ID][ ][Data][ ][Cr]
Data Min: 1 ~ Max: FE
* Refer to 'Real data mapping 1'.
Ack
[r][ ][Set ID][ ][OK][Data][x]
28. Orbiter Pixel Setting
(Command 1 : j, Command 2 : s)
G To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 3
* Refer to 'Real data mapping 1'.
Ack
[s][ ][Set ID][ ][OK][Data][x]
29. Picture Size Setting for DW Mode
(Command 1 : j, Command 2 : t)
G To select the DW picture format.
You can also select the DW picture format using the
SIZE on the remote control.
Transmission
[j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 20
* Refer to 'Real data mapping 1'.
Ack
[t][ ][Set ID][ ][OK][Data][x]
40 PLASMA TV
30. Auto Configure
(Command 1 : j, Command 2 : u)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Ack
[u][ ][Set ID][ ][OK][Data][x]
31. Programme selection
(Command 1 : m, Command 2 : a)
G To select a programme for the main picture.
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Data0 Min: 0 ~ Max: 63 (0 ~ C7, 200Pr is on)
* Refer to 'Real data mapping 1'.
Data1 Don't care
Data2 0 : Main
1 : Sub
Ack
[a][ ][Set ID][ ][OK][Data0][x]
* Real data mapping 1
0 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
C7 : Step 199
FE : Step 254
FF : Step 255
* Real data mapping 2
0 : -40
1 : -39
2 : -38
28 : 0
4E : +38
4F : +39
50 : +40