P .2 ® Accutone is proud to offer the perfect headset solution for small offices and call centers - the T3 Headset Telephone Kit. A simple yet durable PART 2 Device Setup design, T3 is basically a telephone terminal designed to pair with a headset instead of a handset.
Page 3
Main Interfaces (A) Main Interface and Functions TOP VIEW Telephone Headset Jack Where T3 connects to an Accutone headset. Dialing Number Keys Standard keypad including 0-9, star and pound keys. Flash Key To activate transfer calls, conference call, and other functions...etc.
(D) Testing Connection Use the RJ-11 Modular Patch Cable provided to connect the T3 headset Test your T3 Telephone’s setup by making a phone call to someone. Put on your headset and make sure it’s connected properly as illustrated in telephone to any standard Telephone Wall Jack via the (13) Line-In Jack as illustrated.
(H) Selecting Ringer Volume & Auto-Answer Select the level of the Ringtone When you have successfully set up your T3, try adjusting the incoming by adjusting the (11) Auto- volume by pressing the (5) Volume Down Key or (10) Volume Up Answer and Ringer Volume Key.
20 to 50 mA Amplifier Gain - Microphone 35 dB (Max) T3 has an inbuilt call feature called Automatic Line Loss Compensation, - Receiver 12 dB (Max) which provides higher reliability against drop calls. This feature is always Operating Relative Air Humidity <90%...
Need help?
Do you have a question about the T3 and is the answer not in the manual?
Questions and answers