No Signal Power Down; Using Hdmi Tm Cec; Hdmi Tm Cec Playback Device (Dvd Player, Etc.) Control - Toshiba 32L1300U User Manual

No Signal Power Down

The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
Low signal strength of analog channel (no signal detection)
v
Only Audio L/R is connected to external input to listen to music
v
through the TV speakers.
To change the no signal power down setting:
1 From the Options menu, highlight Power Management, and
then press the ENTER button.
2 Highlight No Signal Power Down, and then press the ENTER
button.
3
Press the /▼(arrow) buttons to highlight the item you want to
change, and press the ◄/►(arrow) buttons to select On or Off.
Using HDMI
TM
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI
remote via HDMI
on page
When Enable HDMI CEC Control in the HDMI CEC Control
Setup menu is set to On (see
88), the HDMI
HDMI CEC playback device (DVD player, etc.) control
TM
With your TV's remote control, or using the HDMI
Control menu, you can control the connected HDMI
playback device you are watching.
Available remote control key functions
Button:
PLAY
STOP
PAUSE
SKIP Forward
SKIP Reverse
FF
Default setting for this feature is On.
v
A warning message will appear 1 minute before the TV turns off.
v
CEC
TM
connection (see
TM
29)
CEC functions described below will be enabled.
TM
Description:
Begin playback
Stop playback
Pause the picture during play or record mode
Skip Forward
Skip backward
Fast forward
Using HDMITM CEC
Using HDMI
CEC compatible devices from the TV
"HDMITM CEC connection" HDMI
"Setting up HDMITM CEC" on page
HDMI
Setting up your TV
TM
CEC
TM
CEC
TM
CEC
CEC Player
TM
CEC
TM
85