Siemens Mouse User Manual page 15

User Guide Siemens ID Mouse V3.1
June 2000 Edition Working with the Application
Select Hand / Select Finger
These combo boxes are used to select the hand and finger, respectively. On changing the
hand or finger, the corresponding circle above the finger is also selected automatically.
"Start Capture" Button
If the selected finger is already stored in the archive, you will be asked if you want to improve
the captured image.
If the finger is not yet in the archive, you are requested three times to place the appropriate
finger on the sensor.
If you do not place the finger on the sensor in time, you are asked whether the capture is to be
repeated.
If the quality of the captured image is not good enough, the capture must be repeated.
After the fingerprint has been captured successfully, the added finger is highlighted in green.
"Delete Fingerprint" Button
The deletion of a finger must always be confirmed.
A confirmation is also requested when deleting the last finger of a user or the user itself.
The last finger of the last administrator cannot be deleted.
After a finger has been deleted, the deleted finger is again marked with a white circle.
Image box
The user is requested to place his or her finger on the sensor or to remove it from the sensor
by means of a simple animation.
After each image has been successfully captured, the corresponding fingerprint image is
displayed here.
If the image capture process is completed successfully, a corresponding message is issued,
and the Image box is then cleared.
If the capture is aborted by pressing the Return key, a corresponding message is issued, and
the Image box is then cleared.
"Close" or "Exit" Button
If an administrator has logged on to the application, the "Close" button appears, and pressing
this button returns control to the "Select User" mask.
Otherwise, the "Exit" button appears which, if pressed, exits the application.
Page 15