Changing The Battery; Warranty Information - Electro-Harmonix EHX TORTION Instructions

DI OUTPUT Jack – This is a low impedance output capable of driving 600 to
plug directly into a mixing console or recording equipment. The DI output uses
an all-analog amp/cabinet simulator to create the sound of a real 4x12 cabinet.
This output's signal is line-level, and is controlled by the active Volume knob.
When the EHX TORTION is in bypass mode, the DI output and cabinet simulator
are still active, and send your bypass signal through the simulator. This can be
used to warm up the sound of other pedals or processors for recording.
9V Power Jack – Although the EHX TORTION accepts 9V Batteries, it is
supplied from the factory with an Electro-Harmonix 9.6DC-200BI power supply.
Plug the output of the supplied AC Adapter into the 9V power jack located at the
top of the EHX TORTION. The EHX TORTION draws 27mA at 9VDC with a center
negative plug. The EHX TORTION accepts Boss ® and Ibanez ® style AC Adapters.

- CHANGING THE BATTERY -

To change the 9-volt battery, you must remove the 4 screws on the bottom of
the EHX TORTION. Once the screws are removed, you can take off the bottom
plate and change the battery. Please do not touch the circuit board while the
bottom plate is off or you risk damaging a component. Avoid touching the
trimmers on the circuit board. These have been set at the factory for proper
operation. Changing these trimmers can result in a non-functional unit.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete
and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to operate
due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product
from an authorized Electro-Harmonix retailer. If you should need to return your
unit for service within the warranty period, please email us at info@ehx.com or
call us at (718) 937-8300 to obtain a Return Authorization (RA) number.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
3