Acura 2002 RSX Owner's Manual page 251

Main Menu
Table of Contents
Lights
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the high-mount brake
light cover.
248
Maintenance
Replacing a Rear License Plate
Bulb
1. Insert a flat-tip screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
B B U U L L B B
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
3. Test the lights to make sure the
new bulb is working.
4. Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.