Honda 2002 CL Owner's Manual page 137

Main Menu Table of Contents
Audio System
Operating the Cassette Player
The ignition switch must be in
ACCESSORY (I) or ON (II).
Make sure the tape opening on the
cassette is facing to the right, then
insert the cassette most of the way
into the slot. The system will pull it
in the rest of the way, and begin to
play.
The tape direction indicator will light
to show you which side of the
cassette is playing. The
the side you inserted facing upward
is now playing. If you want to play
the other side, press the PROG
button.
134
Comfort and Convenience Features
Dolby noise reduction turns on when
you insert a cassette. The
cator will light in the display. If the
tape was not recorded with Dolby
noise reduction, turn it off by
pressing the
Noise reduction remains off until you
turn it on by pressing the button
again.
When the system reaches the end of
indicates the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the EJECT
button.
You can remove the cassette with
the ignition switch in any position,
even if the audio system is turned off.
If you turn the system off while a
indi- tape is playing, either with the PWR/
VOL knob or by turning off the
ignition, the cassette will remain in
the drive. When you turn the system
button. back on, the tape will begin playing
where it left off.
To switch to the radio or CD
changer while listening to a tape,
press the AM, FM or CD button. To
change back to the cassette player,
press the TAPE button.