iGREEN GENESIS Tab-2 User Manual page 44

if it is a network that you no longer use.
1. Turn on Wi-Fi, if it's not already on.
2. In the Wi-Fi settings screen, touch & hold the name of the network.
3. Touch Forget in the dialog that opens.
Wi-Fi Settings screen
In addition to the settings described in this section, you can press Menu and
Advanced Wi-Fi settings as described in "Advanced Wi-Fi"
Wi-Fi

Check to turn on Wi-Fi so you can connect to Wi-Fi networks. When connected to
a network, displays the network's name.
Wi-Fi networks

Displays a list of Wi-Fi networks you've previously configured and those detected
when the device last scanned for Wi-Fi networks.
Add Wi-Fi network

Opens a dialog where you can add a Wi-Fi network by entering its SSID (the name
it broadcasts) and security type.
Advanced Wi-Fi settings screen
Network notification

Check to receive a notification when an open Wi-Fi network becomes available.
Keep Wi-Fi on during sleep

Opens a dialog where you can set whether and when the Wi-Fi radio disconnects.
Disabling sleep uses more battery power.
MAC address

The Media Access Control (MAC) address of your device when connecting to
Wi-Fi networks.
IP address

The Internet Protocol (IP) address assigned to the device by the Wi-Fi network you
are connected to (unless you used the IP settings to assign it a static IP address).
GREEN Planet Co.
GENESIS Tab-2
iGREEN
44
www.igreen-co.com